04-20-2019 05:40 PM - edited 06-04-2019 02:49 AM
Hi all,
I am trying to simulate one router in Multi-IOS Cisco Test Network Lab and just get ssh connectivity to this router from my laptop. I reservedMulti-IOS Cisco Test Network Lab and connected to the VIRL server via cisco anyconnect vpn client to address 10.10.20.160. I am not sure about how this router can be configured to get the ssh directly from my laptop such as subnet etc.
I want ssh connectivity from my ubuntu lapotop to test my ansible playbook. Can someone please help?
Thanks,
Manoj
03-16-2020 04:17 PM
Were you able to fix this issue. I do not know how to ssh to the routers.
03-17-2020 02:21 AM
You need to ensure your router(s) are on the right network. For example, set your router to
interface GigabitEthernet1 description OOB Management vrf forwarding Mgmt-intf ip address 172.16.30.102 255.255.255.0 [removed] ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 172.16.30.254
Ensure you have set up ssh correctly on your router
ip domain name cisco crypto key generate rsa modulus 2048 [removed] line vty 0 4 exec-timeout 720 0 password cisco login local transport input telnet ssh
You can connect to the routers via the devbox (10.10.20.50) to start with or via direct access to router VTY via VM Maestro.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide