Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
See attached diagram: I need to do the following: (NOTE: The Firewall and the EIGRP are connected to VRF-C / REMOTE SITE and TRANSIT routers are in the same location) For VRF-B to Communicate with VRF-C, the traffic has to go through the transit site...
I am running 2 VRF's between a CE and PE*VRF's name: DATA and SECURITY*In the PE - I do route leaking (Importing the routes in each VRF).*In the CE, I expected the DATA routes in the SECURITY table and I expected the SECURITY routed in the DATA table...
I am planning to upgrade a Nexus N9K with 2 supervisor modules. Is the process the same as upgrading a N9K with 1 supervisor module. When I upgrade a N9K, I use the following command: install all nxos bootflash:File_Name Thanks!
We have been dealing with a Cisco DNA issue for the past 24 hours. We added a access switch within the DNA fabric - End result:1) By adding the new switch, it breaks 2 other access switch that use to work - User are unable to get DHCP or ping outside...
*Yes, the backup link will be connected in R7 in the DATA VRF and will be running EIGRP. I am going to redistribute the EIGRP routes into BGP.*Once R3 learns the routes via EBGP (DATA VRF)- I am going to leak them into the SECURITY VRF in R3 -- So th...
Paul, I realize I did not include all the info (I thought the snipet that I provided would be enough). I attached a new diagram which explains what I am trying to do. I am running cisco DNA in the main site.R1, R2, R3, and R3 will be the transit.Now,...
