unable to log in to anyconnect

[nuzim]

keep getting this error, anybody knows what that is:

VPN establishment capability for a remote user is disabled. A VPN connection will not be
established

[Kasun Bandara]

Hi Nuzim,

this can be configuration change. check below links.

https://blog.expta.com/2020/04/how-to-enable-cisco-anyconnect-vpn.html

https://www.alfredtong.com/cisco/how-to-enable-cisco-anyconnect-vpn-through-remote-desktop/

Please rate and upvote if this helps.

Good luck

KB

[nuzim]

Hello Kasun,

I do not think this will work for me. The reason why I want to use Cisco's anyConnect is for the purpose of taking advantage of Cisco's Modeling Labs. It is a requirement to have anyConnect installed on the device. 

I do not have access to the ASDM. Also, the connection name/IP might change which means that I have to make changes on the cisco anyconnect client every time there is a name/IP change.

thanks

[bigevilbeard]

@nuzim are you trying to connect the AnyConnect client capability from a remote desktop?

[nuzim]

yes, I have installed anyConnect on my desktop.

[bigevilbeard]

@nuzim  Go to your virtual machines and edit the Settings.

• Under Networking, ensure that you are using Share Networking (NAT)
• Under Integration Features, ensure that Enable at startup is NOT checked

Now, if you launch your virtual machine Cisco AnyConnect should connect.