cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel
486
Visitas
4
ÚTIL
3
Respuestas

Enable ssh V2

alexisbonilla84
Level 1
Level 1

It is possible to enable SSH V2 on swicht catalyst 2960X


Switch Ports    Model                            SW Version                  SW Image
------ ----- ----- ---------- ---------------- ----- ----- ---------- ----------
* 1 52             WS-C2960X-48LPS-L   15.2(4)E8                    C2960X-UNIVERSALK9-M

3 SOLUCIONES ACEPTADAS

Soluciones aceptadas

M02@rt37
VIP
VIP

Hello @alexisbonilla84;

configure terminal

ip ssh version 2 

 

It is recommended to use a modulus size for RSA Keys of at least 2048 bits for stronger security (min value for ssh v2).

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

Ver la solución en mensaje original publicado

Yes it is supported.

enable
configure terminal

ip domain-name <company domain>
crypto key generate rsa 1024 or higher

ip ssh version 2

line vty 0 4
transport input ssh

line vty 5 15
transport input ssh

Regards,




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Ver la solución en mensaje original publicado

according to cisco doc.
Ver.2 is by default enable 
"""The configuration for the SSH Version 2 server is similar to the configuration for SSH Version 1. The 
ip ssh version command defines the SSH version to be configured. If you do not configure this command, SSH by default runs in compatibility mode; that is, both SSH Version 1 and SSH Version 2 connections are honored.

SSH Version 1 is a protocol that has never been defined in a standard. If you do not want your device to fall back to the undefined protocol (Version 1), you should use the ip ssh version command and specify Version 2. """

Ver la solución en mensaje original publicado

3 RESPUESTAS 3

M02@rt37
VIP
VIP

Hello @alexisbonilla84;

configure terminal

ip ssh version 2 

 

It is recommended to use a modulus size for RSA Keys of at least 2048 bits for stronger security (min value for ssh v2).

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

Yes it is supported.

enable
configure terminal

ip domain-name <company domain>
crypto key generate rsa 1024 or higher

ip ssh version 2

line vty 0 4
transport input ssh

line vty 5 15
transport input ssh

Regards,




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

according to cisco doc.
Ver.2 is by default enable 
"""The configuration for the SSH Version 2 server is similar to the configuration for SSH Version 1. The 
ip ssh version command defines the SSH version to be configured. If you do not configure this command, SSH by default runs in compatibility mode; that is, both SSH Version 1 and SSH Version 2 connections are honored.

SSH Version 1 is a protocol that has never been defined in a standard. If you do not want your device to fall back to the undefined protocol (Version 1), you should use the ip ssh version command and specify Version 2. """

Vamos a comenzar

¡Conecte con otros expertos de Cisco y del mundo! Encuentre soluciones a sus problemas técnicos o comerciales, y aprenda compartiendo experiencias.

Queremos que su experiencia sea grata, le compartimos algunos links que le ayudarán a familiarizarse con la Comunidad de Cisco: