custom.ribbon_feed
cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel
1169
Visitas
0
ÚTIL
4
Respuestas

ERROR PVST+RSTP

edquijano
Level 1
Level 1

Que tal comunidad.

Espero me puedan ayudar con este problema. Tengo 12 switches 3560 conectados por troncales entre si, el VTP es transparente y las vlan estan configuradas manualmente en cada uno de los switches. a modo de mejorar el funcionamiento estoy implementando PVST + RSTP, prioridades distintas para cada VLAN, el problema que tengo es que varias vlan dadas de alta no presentan instancia stp por esto no me ha sido posible configurar las prioridades para cada vlan.

me muestra el siguiente error:

3560#show spanning-tree vlan 455

Spanning tree instance(s) for vlan 455 does not exist

al revisar el sh run conf se puede ver como esta vlan tiene un 'no spanning-tree vlan' el problema es, como quito el 'no spanning-tree vlan 455'

he realizado pruebas configurando la prioridad por vlan por ejemplo: 'spanning-tree vlan 455 priority 4096', sin embargo el error persiste.

como puedo remover estas lineas?

espero puedan apoyarme, saludos!

------------------------------------------------------------------------

no spanning-tree vlan 5-9,46,50,70-82,91,255,415-418,425-427,434-439,446-448

no spanning-tree vlan 455-460,467-469,476-481,488-490,497-502,509-511,518-523

no spanning-tree vlan 530-532,539-544,551-553,572-574,593-595,611-616,632-637

no spanning-tree vlan 653-658,674-679,695-700,815-880

spanning-tree vlan 1,317-322,413-418,518-523,539-544,611-616,632 priority 4096

spanning-tree vlan 633-637,653-658,674-679,695-700,805-808,815 priority 4096

----------------------------------------------------------------------------

3560#show vtp status

VTP Version capable             : 1 to 3

VTP version running             : 2

VTP Domain Name                 :

VTP Pruning Mode                : Disabled

VTP Traps Generation            : Disabled

Device ID                       : 3cdf.1e98.a200

Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

Feature VLAN:

--------------

VTP Operating Mode                : Transparent

Maximum VLANs supported locally   : 1005

Number of existing VLANs          : 317

Configuration Revision            : 0

MD5 digest                        : 0x75 0x82 0x44 0x02 0x08 0x79 0xD1 0x3E

                                    0x76 0xCD 0x31 0xC2 0x65 0xD6 0xC1 0x78

---------------------------------------------------------------

3560#show spanning-tree summary

Switch is in rapid-pvst mode

Root bridge for: VLAN0001, VLAN0003, VLAN0101, VLAN0299-VLAN0301

  VLAN0341-VLAN0343, VLAN0750, VLAN0800-VLAN0804, VLAN0809-VLAN0814

  VLAN0881-VLAN0883, VLAN0889, VLAN0898-VLAN0917

Extended system ID           is enabled

Portfast Default             is disabled

PortFast BPDU Guard Default  is disabled

Portfast BPDU Filter Default is disabled

Loopguard Default            is disabled

EtherChannel misconfig guard is enabled

UplinkFast                   is disabled

BackboneFast                 is disabled

4 RESPUESTAS 4

bzendeja
Cisco Employee
Cisco Employee

Hola Eduardo,

Para habilitarlo solo ejecuta el comando "spanning-tree vlan 455" sin ningún otro parámetro. Más información en este link.

http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_s2.html#wp1113230

Si sigue sin funcionar envia el comando "show vlan id 455".

Déjame saber si esta información te ayuda.

Saludos,

Bernardo

edquijano
Level 1
Level 1

Gracias por la respuesta, Bernardo.

te comento que persiste el problema, un debug me ayudaria para resolver el problema?

adjunto los resultados del sh vlan id

560(config)#spanning-tree vlan 455

3560(config)#exit

3560#show spanning-tree vlan 455

Spanning tree instance(s) for vlan 455 does not exist.

-------------------------------------------

3560#show vlan id 455

VLAN Name                             Status    Ports

---- -------------------------------- --------- -------------------------------

455  VLAN0455                         active    Gi0/1, Gi0/2, Gi0/4, Gi0/24

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

455  enet  100455     1500  -      -      -        -    -        0      0

Remote SPAN VLAN

----------------

Disabled

Primary Secondary Type              Ports

------- --------- ----------------- ------------------------------------------

Buenas tardes Eduardo

Me parece que el problema es porque tienes demasiadas vlans configuradas en el equipo.  La plataforma 3560 soporta un máximo de 128 instancias de spanning-tree, en tu caso observo que tienes 317 vlans configuradas:

Feature VLAN:

--------------

VTP Operating Mode : Transparent

Maximum VLANs supported locally : 1005

Number of existing VLANs : 317

Para probar que este es el problema, crea una nueva vlan y observa si aparece el siguiente mensaje de error:

%SPANTREE_VLAN_SW-2-MAX_INSTANCE: Platform limit of 128 STP instances exceeded. No instance created for VLANxxxx.

Si esto aparece entonces se confirma lo anterior y habría 2 soluciones posibles:

1) Eliminar las vlans que no sean necesarias.

2) Cambiar spanning-tree a MST.

La primer solución es recomendada y mucho mas sencilla de implementar.

Por favor dejanos saber si esto te ayuda.

Saludos.

Hector.

Buenas Eduardo,

Tu pregunta es muy interensate, me parece que Hector la responde muy bien me gustaria saber si eso resolvio tu pregunta??

Saludos,

Andres Larios