ip device tracking

[Jhony.Da]

Hello,

I have been using the ip device tracking command to detect the MAC and IP of my devices connected to the ports of my Cisco switches, but I noticed that this command does not work on one of my switches that I recently purchased Cisco C9200L IOS 17, I have searched for a similar command that gives me the same data but I have not found any of the same, and here is my question if you know of any similar one that replaces these functions what provided the ip device tracking.

[luis_cordova · Accepted solution]

Hello

I find this information about what you request.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-12/configuration_guide/sec/b_1612_sec_9200_cg/configuring_sisf_based_device_tracking.html#Cisco_Concept.dita_07179048-0af9-4132-ae79-caf152978443

I hope you find it useful.

Greetings

[Jhony.Da · Accepted solution]

From what I read from the document, I used the "device-tracking" command on the port and with a "sh device-tracking database" I could see what it did with the old command, I didn't investigate further but this helped me for my problem, I hope that Someone else can help you.