05-04-2012 01:38 PM
Hello,
I'm trying to set up cluster of two C170 appliances. I run cluster config on first appliance and create new cluster (IP address and port 22 are used for communication) then I try to add second appliance to cluster (clusterconfig -> n -> 3 -> IP -> 22) but unsuccessfully. I always get timeout for clusterconfig command. Both appliances are in the same subnet, I'm able to telnet from second to first appliance to port 22 and I'm using latest AsyncOS - 7.5.2. Any ideas what to check?
Regards,
Aljosa
Solved! Go to Solution.
05-08-2012 10:56 AM
Hello Aljosa,
can you please verify that both appliances and IP addresses in use have an A and PTR record set up in the DNS? This is a prerequisite and most likely the reason when running into connection timeouts.
Thanks and regards,
Martin
05-08-2012 10:56 AM
Hello Aljosa,
can you please verify that both appliances and IP addresses in use have an A and PTR record set up in the DNS? This is a prerequisite and most likely the reason when running into connection timeouts.
Thanks and regards,
Martin
05-09-2012 12:45 AM
Hi,
thnx it was problem with dns server. Althougth I use IP address for cluster connection "wrong" dns entry couses timeout.
Br, Aljosa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide