Configure for email outgoing

[osw200051]

Hi Expert,

I need your help.

I need to use esa for outgoing email. To setup the esa, which part i need to configuration? any reference?

Thanks

[marc.luescherFRE]

Did you follow the following setup guide ?

https://www.cisco.com/c/dam/en/us/products/collateral/security/esa-initial-setup-wizard.pdf

and

https://www.cisco.com/c/en/us/support/security/email-security-appliance/products-configuration-examples-list.html

I hope this can get you started.

-Marc

[Mathew Huynh · Accepted solution]

With addition to Marc's information at a high level...

Any mail hosts matched under a sendergroup linked with Relay mail flow behaviour will be considered outbound, this means that this mail host will be able to bypass the RAT checking and send emails to any recipient domains out there.

Relay mail flow behaviour by default is bound to the private listener, but you can create it on the public listener as well if you are running a one listener setup.

Regards,
Mathew

[osw200051]

Mathew,

Many thanks. Completed and it matches to outgoing policy well.