Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Expert, I encountered a case under Cisco C9500 high Performance model. my client connect and get the IP address, gateway point to C9500. But not reachable. Show ARP in C9500, the ARP entry is correct.After the action "clear ip arp x.x.x.x" in C950...
Hi Exprt, I am deploying cisco macsec by using two cisco C9300 in two sites. And the inter-connection is using MetroEthernet.But found that after deployed macsec, physical port status is up, but protocal is down. After debug the mka policy, found th...
Hi Expert, I have a question about Native Vlan.We have two N9K form vPC. Let say N9K-A & N9K-B N9K A connect to a server-A with trubk port with native vlan 100.N9K B connect to a server-B with trubk port with native vlan 100. On this situtation, do I...
Dear Expert, Urgent !Can I call up a conference with two people at once call?Such as User A dial a number at one time, and then user A can line up user B and user C and form a conference. Please help
Hi all, Could anyone can tell me why the output showed "0" packets but the "bytes output" is increasing?Is that the queuing value so it shows "0" ? Class-map: voice-traffic (match-any)0 packetsMatch: cos 60 packets, 0 bytes5 minute rate 0 bpsQueueing...
Hi balaji.bandi,Cisco C9500 is the core switch. It connects to C2960X, and C2960X connects to client PC. subnet gateway locates at C9500. It is SVL ip subnet for client. Before clear the arp, the arp record is correct (true IP and mac address), but c...
HI,Thanks for the reply.The model and version is below Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ---------- ----* 1 52 WS-C3650-48PD 16.3.6 CAT3K_CAA-UNIVERSALK9 INSTALL2 52 WS-C3650-48PD 16.3.6 CAT3K_CAA-UNIVERSALK9 I...
