help me in ironport

[CSCO11825412]

hello all

i have cisco router 2900 this internet router

and after router conected directry by asa 5540

and conetecd by ciso switch and have tmg 2010 and exchanger 2010

i plan to install ironport c170

ip for router is 192.168.1.1/24

and ip for asa outside int 192.168.1.2/24

ip address for asa 192.168.193.2/24

ip address for tmg 192.168.193.3/24 extenal network

and internal ips

10.28.64.0/24

all network access inernet via proxy server 10.28.64.1:8080

in asa i make access list for exchange 443

587 port and 80

where i can put ironport and ip address for data 1 interface and data 2  and

i need to configure it as spam filter only

please i want all steps in this sinareo

[CSCO11825412]

exhange ip 10.28.64.10/24

email admin@exchange.com example for reports

[Andreas Mueller · Accepted solution]

Hello Mohamed,

basically what  you need to do is to run the setup wizzard and configure all host  settings, receiving domaink, and your destinations Exchange server  there. Then enable antispam (Security Sercices->Antispam) and  activate it in your inbound mail policies (Mail Policies Incomming Mail  Policies). As you are using a proxy for internet access, this needs to  be included in your update settings as well, in order for the antispam  engine to receive updates.

Security Services -> Update Service Updates -> Edit Update Settings -> Proxy Servers

Also do not forget to commit your changes once you are done with everything.

Hope that helps,

Andreas

[CSCO11825412]

• thanks mr andreas
• but i want to know monter and report about email spam droped or had virus attachment how i can see report please tell me step by step