01-07-2014 02:53 PM
Hello Guys,
Im not being able to access ironport using either the gui or ssh, maybe during its configuration i might have changed the default management address 192.168.42.42 to something else if yes then is there a way to find out what the new management ip is so that i could log in
01-08-2014 08:18 AM
Have you tried using a ping sweep utility to find your IP address? We have used Nmap before and that works pretty well.
01-08-2014 12:14 PM
Mike
what would i type in Nmap to find out the ip address of the Management cable so that i could login to web gui and ssh
01-08-2014 09:01 AM
Is the appliance local to you? Can you hook up a serial cable, and attempt to access?
The C350 should be similar to the C360, in the quickstart guide:
http://www.cisco.com/en/US/docs/security/esa/hw/C360.QSG.pdf
SETUP AND MANAGEMENT
• For access by Ethernet™, connect to the Management Network
Port. Use a browser to access the web-based interface on the
default IP address 192.168.42.42. You can also access the
command line interface by SSH or terminal emulation software
on the same IP address. (The netmask is /24.)
• Or, for Serial access, connect to the Serial Port. Access the
command line interface by a terminal emulator using 9600
bits, 8 bits, no parity, 1 stop bit (9600, 8, N, 1), flowcontrol =
Hardware.
01-08-2014 12:14 PM
Robert
yes the appliance is local to us we are testing it out, unfortuantely I couldnt find the serial cable that came with the ironport but i have just ordered it today, seems like thats the only way i could see if the ironport is online let alone access it
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide