10-26-2012 04:06 AM
Hi,
I've a Ironport C160 cluster running AsyncOS 7.5.1 and after I changed the IP of the Data2 Interface I can't access the quarantine page anymore. The page start to loading and give me page not found, there is someone that had this problem?
Solved! Go to Solution.
10-30-2012 01:56 AM
Hi,
it is possible that the new IP address is not allowed on the firewall yet. Please check your firewall rules and make sure to put a rule in place which allows access via HTTP/HTTPS to that new IP address. Verify the ports you have configured for accessing the ISQ so that they match with the FW rule and make sure to tick the checkbox for "this is the default interface for quarantine access" under Network - Interfaces.
I hope this helps.
Best regards,
Enrico
10-30-2012 01:56 AM
Hi,
it is possible that the new IP address is not allowed on the firewall yet. Please check your firewall rules and make sure to put a rule in place which allows access via HTTP/HTTPS to that new IP address. Verify the ports you have configured for accessing the ISQ so that they match with the FW rule and make sure to tick the checkbox for "this is the default interface for quarantine access" under Network - Interfaces.
I hope this helps.
Best regards,
Enrico
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide