Raid Problem in C160 Ironport

[Maen Abbasi]

I am getting this error from mt ironport C160 

A RAID-event has occurred:

RAID Read error (5), 5 read errors total disk 0[READ(offset=69281807872, length=65536)] RAID Read error (5), 6 read errors total disk 0[READ(offset=69283839488, length=65536)] RAID Read error (5), 7 read errors total disk 0[READ(offset=69307497984, length=65536)]

Version: 8.5.6-092

Serial Number: XXXXDBE1328D-XXXDFP1

Timestamp: 30 Oct 2014 10:01:32 +0400

How can I check the HDD status and I can change it if there is a problem in it ? 

[Robert Sherwin]

Usually the RAID errors are indicative of a failed HDD.  You can try looking at the output of version from the CLI, or run ipcheck.  These may show you if there are RAID or degraded issues.

I would suggest that you open a support case opened, as this appliance will most likely have to be RMA'd.  Since it is a C160, it will be replaced with a C170.  You would need to get an open support case so that we can review the appliance via a support tunnel.  

You can open a support case through Contacts/Support Case, or the Service Request Tool.

-Robert

[Maen Abbasi]

 RAID Status           SUBOPTIMAL

and I don't have Smartnet renewed :) 

so I am doomed !

[Robert Sherwin]

Correct - no contract, no RMA.  :-(

-Robert

[Maen Abbasi]

can I renew the contract of it?