03-09-2015 07:37 AM
Hi all,
i need to setup LDAP connetction to verify recipient email address in incoming.
LDAP is protected by SSL,do i need a certificate?
how can i get a certificate? i mean what is the right procedure to request a certificate to CA , internal one that manages Domain Controllers,and install it in ironport ESA?
thanks a lot
smaikol
Solved! Go to Solution.
03-09-2015 10:09 PM
Hi Smaikol,
On thicase to use the LDAPS (LDAP over SSL), the Microsoft Server will need to meet the requirements you just mentioned, it will need an SSL certificate from a third party CA (Certificate authority)
To enable LDAPS, you must install a certificate that meets the following requirements:
Now to get the pertinent certificate you will need to create a request, you will be able to find those instructions and further information within the following link:
- http://support.microsoft.com/kb/321051/en-us
Let me know how it works out!
Please don't forget to rate and mark as correct the helpful Post!
David Castro.
Best regards.
03-09-2015 10:09 PM
Hi Smaikol,
On thicase to use the LDAPS (LDAP over SSL), the Microsoft Server will need to meet the requirements you just mentioned, it will need an SSL certificate from a third party CA (Certificate authority)
To enable LDAPS, you must install a certificate that meets the following requirements:
Now to get the pertinent certificate you will need to create a request, you will be able to find those instructions and further information within the following link:
- http://support.microsoft.com/kb/321051/en-us
Let me know how it works out!
Please don't forget to rate and mark as correct the helpful Post!
David Castro.
Best regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide