Solved: Re: SSH service is not working in ESAv

pbabu6001 · ‎08-22-2017

Hi Support team,

We are unable to connect our virtual IronPort server through putty - 22 port (SSH), but all other services are working fine like https, ftp, smtp and able to ping as well.

Kindly provide your assistance. Many thanks.

dmccabej · ‎08-22-2017

Hello,

Do you have SSH enabled on the interface you're trying to connect to? You can view this within the GUI by navigating to Network --> IP Interfaces --> Select the interface in question --> Make sure SSH is enabled. If it is already enabled, you may wish to try disabling it, submitting/comitting and then re-enabling it.

Thanks!

-Dennis M.

View solution in original post

dmccabej · ‎08-22-2017

Hello,

Do you have SSH enabled on the interface you're trying to connect to? You can view this within the GUI by navigating to Network --> IP Interfaces --> Select the interface in question --> Make sure SSH is enabled. If it is already enabled, you may wish to try disabling it, submitting/comitting and then re-enabling it.

Thanks!

-Dennis M.

pbabu6001 · ‎08-22-2017

It is working, thank you so much for your assistance.

dmccabej · ‎08-22-2017

Awesome! You're very welcome and I'm glad that I was able to assist. :)

-Dennis M.