I am trying to replace my secondary firewall and iam getting error " no response from mate " I can ping the failover interfaces
ASA1
---------------
failover
failover lan unit primary
failover lan interface FOLINK TenGigabitEthernet0/9
failover polltime unit msec 500 holdtime 2
failover polltime interface msec 500 holdtime 10
failover key *****
failover replication http
failover link SFOLINK TenGigabitEthernet1/9
failover interface ip FOLINK 192.168.25.81 255.255.255.252 standby 192.168.25.82
failover interface ip SFOLINK 192.168.25.85 255.255.255.252 standby 192.168.25.86
ASA2
--------------------------
failover
failover lan unit secondary
failover lan interface FOLINK TenGigabitEthernet0/9
failover polltime unit msec 500 holdtime 2
failover polltime interface msec 500 holdtime 10
failover key *****
failover replication http
failover link SFOLINK TenGigabitEthernet1/9
failover interface ip FOLINK 192.168.25.81 255.255.255.252 standby 192.168.25.82
failover interface ip SFOLINK 192.168.25.85 255.255.255.252 standby 192.168.25.86
ciscoasa#sh failover
Failover On
Failover unit Secondary
Failover LAN Interface: FOLINK TenGigabitEthernet0/9 (up)
Unit Poll frequency 500 milliseconds, holdtime 2 seconds
Interface Poll frequency 500 milliseconds, holdtime 10 seconds
Interface Policy 1
Monitored Interfaces 1 of 256 maximum
failover replication http
Version: Ours 8.2(5), Mate Unknown
Last Failover at: 10:12:12 UTC Dec 6 2017
This host: Secondary - Active
Active time: 5 (sec)
slot 0: ASA5585-SSP-10 hw/sw rev (2.0/8.2(5)) status (Up Sys)
admin Interface management (10.91.110.11): Normal (Waiting)
slot 1: UNKNOWN hw/sw rev (1.0/) status (Unresponsive)
Other host: Primary - Failed
Active time: 0 (sec)
slot 0: empty
admin Interface management (0.0.0.0): Unknown (Waiting)
slot 1: empty
Stateful Failover Logical Update Statistics
Link : Unconfigured.
ciscoasa# conf t
No Response from Mate
