cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


215
Views
15
Helpful
5
Replies
Contributor

cant access asdm after changing inside ip?

i have asa 5520 , i dont understand why when i changed my inside ip address i can no longer access the asdm? even though i have set the access tange for asdm https 0.0.0.0 0.0.0.0 inside?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: cant access asdm after changing inside ip?

check on the Switch it was connected, and clear arp table in the switch and check again.

BB
*** Rate All Helpful Responses ***
5 REPLIES 5
Hall of Fame Master

Re: cant access asdm after changing inside ip?

Did you change the subnet or just the host address within the subnet?

If it's the former then routing may also need to be updated.

Contributor

Re: cant access asdm after changing inside ip?

I just changed the ip not the subnet and now i cant access the asdm
VIP Advisor

Re: cant access asdm after changing inside ip?

what was the IP before it was working, what is the IP you have changed ?

 

what is the error you getting while you access the NEW IP,

 

Do you have reachability from your PC to new Manangement IP of ASDM ?

BB
*** Rate All Helpful Responses ***
Contributor

Re: cant access asdm after changing inside ip?

it was 172.16.50.40 and i changed it to 172.16.50.100
VIP Advisor

Re: cant access asdm after changing inside ip?

check on the Switch it was connected, and clear arp table in the switch and check again.

BB
*** Rate All Helpful Responses ***