11-25-2010 02:50 PM - edited 03-16-2019 02:07 AM
I need to calculate the consumption of IP phones SPA500G2 and SPA500G4 with Cisco switches WS-C2960S-L-48FPD.
In the Cisco Power Calculator I have no similar phone model.
There is a tool to calculate it, or can someone tell me how many phones can support the switch?
Best Regards.
Luciano Cesare
Solved! Go to Solution.
11-25-2010 03:07 PM
WS-C2960S-L-48FPD has 740w for PoE. So you can use up to 48 ports of 15.4w. If you need PoE+ (30.0w) then it's first-come-first-serve-until-full.
Please don't forget to rate useful posts. Thanks.
11-25-2010 03:07 PM
WS-C2960S-L-48FPD has 740w for PoE. So you can use up to 48 ports of 15.4w. If you need PoE+ (30.0w) then it's first-come-first-serve-until-full.
Please don't forget to rate useful posts. Thanks.
11-25-2010 04:25 PM
Thanks for the rating.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide