6945 not listed on CME

[Ameen Ameer Ali]

6945 not registering to cme version 8,1. when i checked phone type list 6945 type is not listed .Which version support this phone.Please let me know.

[paolo bevilacqua · Accepted solution]

CME 8.8 and onward.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme88spc.html

That means you can not use the 6945 with an ISR G1 router like 28xx and 38xx.

[Jaime Valencia · Accepted solution]

You can review that here:

Cisco Unified CME and Cisco IOS Software Version  Compatibility Matrix

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

8.8 is the minimum for that model.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Ameen Ameer Ali]

Can i upgrade to version 9.0..?..Will it have any effect on licenses.

[paolo bevilacqua]

ameen ali wrote:
Can i upgrade to version 9.0..?..Will it have any effect on licenses.

Wich router modeul do you have ?

[Ameen Ameer Ali]

2921 with ios 15.1(2)T5

Sent from Cisco Technical Support iPhone App

[paolo bevilacqua]

You can update IOS to support CME 9.0. There is no licensing issue.

Thanks you for the nice rating and good luck!