05-30-2017 02:48 PM - edited 03-17-2019 10:27 AM
Hi guys,
Is there a way to make the phone register without having to configure each of their mac address manually?
Using CME on 2911 router
IOS version: c2900-universalk9-mz.SPA.155-3.M5
Current config example:
voice register pool 1
busy-trigger-per-button 2
id mac 6CFA.8903.D5B4
type 7821
number 1 dn 1
Regards,
Felix
Solved! Go to Solution.
05-31-2017 11:13 AM
Hi Felix,
auto registration for sip endpoint is available starting from CME version 11.5 which means ios version 15.6.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmeroad.html
Please upgrade your Cme and all should work
HTH
Regards
Carlo
05-31-2017 12:00 AM
By default, auto-registration is turned on in CME. But I would not suggest that as the phones will automatically register when they contact CME. You can also disable it by using below commands once you are done with the registration of phones.
no service-enable [Under voice register global -- SIP ]
no auto-reg-ephone [telephony-service -- SCCP]
Use the show ephone attempted-registrations [for SCCP] command to view the list of phones that have attempted to register. Find the below link helpful.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/cme_a1ht.html#wp3432972036
HTH
Regards
Abhay
Kindly rate all helpful posts !!!
05-31-2017 09:56 AM
If I don't enter the id mac no registration happens for the phone
05-31-2017 11:13 AM
Hi Felix,
auto registration for sip endpoint is available starting from CME version 11.5 which means ios version 15.6.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmeroad.html
Please upgrade your Cme and all should work
HTH
Regards
Carlo
06-01-2017 08:26 AM
Carlo thanks a lot!
02-01-2023 10:37 AM
Hi
could you share your config on this please? I’m running in the same issue with 8821’s on CMEv12
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide