Hello dear community members,
This is my first topic on this board so I apologize if it is misplaced and/or does not follow the community guidelines strictly.
I need your help regarding Cisco IP Phone 7912 model. I registered it on my Asterisk server and I'm updating the config file via TFTP. Here's how the config gkXXXXXXXXXXXX.txt looks like:
"#txt
upgradecode:3,0x601,0x0400,0x0100,0.0.0.0,69,0x060111a,CP7912080000SIP060111A.sbin
UIPassword:1234
dhcp:1
Proxy:pbx-ip
UID:5424
PWD:pwd123123123
LoginID:0
TimeFormat:H:i:s
DateFormat:d/m/y
SIPPort:5060
SIPRegInterval:120
SIPRegOn:1
NTPIP:10.45.66.130
AudioMode:0x00000010
NumTxFrames:2
ConnectMode:0x00000010
TimeZone:4
UseTftp:1
CfgInterval:3600
TraceFlags:0x00000000
RingOnOffTime:2,4,25
DialTone:2,31538,814,30831,2032,0,0,0,0,0,0
DialTone2:2,30743,1384,29864,1252,0,0,0,0,0,0
BusyTone:2,30467,1104,28959,1404,1,4000,4000,0,0,0
ReorderTone:0,2,30467,1104,28959,1404,0,0,1,2000,2000,0,0,0,0,0,0
RingBackTone:2,30831,2032,30467,1104,1,16000,32000,0,0,0
CallWaitTone:1,30831,2412,0,0,1,2400,2400,0,0,4800
MediaPort:16384
SigTimer:0x00000064
CallWaiting:1
AttendedTransfer:1
BlindTransfer:1
Conference:1"
The phone is registered, but when calling to another extension it does not show the dialed destination extension name on the display.
I want to enable Remote-Party-ID (RPID) option but I can not find which parameter to add in gkXXXXXXXXXXXX.txt file.
On 7911 model, where configuration is provided by XML file, the parameter is:
<remotePartyID>true</remotePartyID>
I want to find a similar parameter for 7912 phones.
Thank you!
