05-16-2016 12:07 PM - edited 03-17-2019 06:56 AM
Is there a phone button template that will utilize the 3 unused buttons on a 8845 or 8865 model phone? The Data sheet states that only 5 of the 10 buttons on the phone are programmable. I would like to add additional speed dials if possible.
Solved! Go to Solution.
05-16-2016 05:50 PM
As you read it from the data sheet we can only configure up to 5 programmable lines on Cisco 8800 series phones, any additional line configuration would move to KEM if configured.
refer below data sheet demo video which confirms the same.
http://www.cisco.com/c/en/us/products/collaboration-endpoints/ip-phone-8851/index.html
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/adminguide/P881_BK_C136782F_00_cisco-ip-phone-8800_series/P881_BK_C136782F_00_cisco-ip-phone-8811-8841_chapter_0111.html
05-16-2016 05:50 PM
As you read it from the data sheet we can only configure up to 5 programmable lines on Cisco 8800 series phones, any additional line configuration would move to KEM if configured.
refer below data sheet demo video which confirms the same.
http://www.cisco.com/c/en/us/products/collaboration-endpoints/ip-phone-8851/index.html
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/adminguide/P881_BK_C136782F_00_cisco-ip-phone-8800_series/P881_BK_C136782F_00_cisco-ip-phone-8811-8841_chapter_0111.html
02-14-2017 10:15 AM
Just updating this thread since this is no longer the case with the availability of Enhanced Line Mode:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide