8941 SCCP Firmware for CME

[Mario Garcia]

I am trying to located the SCCP firmware for an 8941 in order to register it with a CME.

I cannot locate CME files for 8941 on cisco.com, only CUCM files appear to be available and the files are not included in the  CME-151-4Mv1 file pack from cisco.com

Can someone please provide me with the files or provide a link to be able to download them.

Thanks,

Mario

[acampbell]

Hi,

Look at the CME S/W matrix

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

If you want to use 8941s then you need to upgrade to CME 8.8 (IOS 15.2.1T)

Click on the CME 8.8 link and you will see what is supported and which files are recommended

HTH

Alex

Please rate useful posts

[paolo bevilacqua]

Phones firmware is the same for CM or CME.

When not included in the CME files pack, you will need to purchase a support contract for the phone, and download it separately.