Solved: Hi Shadi,I´ve 3 gateways in

ggl277808 · ‎04-13-2015

Hi there,

I´ve migrated a CUCM 6 to CUCM10.5, so the Gateways remain with the same configuration and all work fine, except ip phones does not display the prefix number for incoming international calls.

Any ideas??

Thanks in advance.

Guillermo

Shadi Shami · ‎04-14-2015

Hello Guillermo,

Kindly mark it as answered.

Thank you,

Sahdi

View solution in original post

Shadi Shami · ‎04-13-2015

Hello Guillermo,

Can you add more details please? How the GW is connected to CUCM, is MGCP, SIP or H323?

How are you connected to PSTN, SIP Trunk, PRI (E1/T1) or FXO?

Thank you,

Shadi

ggl277808 · ‎04-13-2015

Hi Shadi,

I´ve 3 gateways in different location, connected via H323 to CUCM, and the gateways are connected via PRI(E1)interfaces.

Thank you

Guillermo

Shadi Shami · ‎04-13-2015

Can you please navigate to Device > Gateway, open one of the GWs and scroll down into: Incoming Calling Party Settings > International Number, and check whether the prefix showing up there or not?

If there, please collect the following debugs from one of the GWs:

debug isdn q931

debug voip ccapi inout

and provide running config.

Thank you,

Shadi

ggl277808 · ‎04-13-2015

Here is the running config and I´ve attached the screenshot of the calling party setting of a gateway and the logging file.

Thank you Shadi

no ip domain lookup
no ftp-server write-enable
isdn switch-type primary-net5
!
!
voice rtp send-recv
!
voice service voip
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
codec preference 3 g711alaw
!
!
!
voice class h323 1
h225 timeout tcp establish 3
!
!

!
controller E1 0/0
pri-group timeslots 1-31
!
translation-rule 1
Rule 0 ^700. 91374040
Rule 1 ^701. 91374041
Rule 2 ^702. 91374042
Rule 3 ^704. 91337704
Rule 4 ^705. 91337705
!
!
!

!
voice-port 0/0:15
no vad
cptone ES
!
!
!
!
dial-peer cor custom
!
!
!
dial-peer voice 9000 pots
description llamadas nacionales
destination-pattern 0[89]........$
progress_ind setup enable 3
progress_ind alert enable 8
fax rate disable
direct-inward-dial
port 0/0:15
forward-digits 9
!

dial-peer voice 6000 pots
description llamadas moviles

destination-pattern 0[67]........$
progress_ind alert enable 8
fax rate disable
direct-inward-dial
port 0/0:15
forward-digits 9
!
dial-peer voice 9900 pots
description llamadas internacionales
destination-pattern 000T
progress_ind setup enable 3
progress_ind alert enable 8
fax rate disable

direct-inward-dial
port 0/0:15
prefix 00
!
dial-peer voice 112 pots
description llamada emergencia
destination-pattern 01..
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 0/0:15
prefix 1
!
dial-peer voice 91 pots
description llamada emergencia
destination-pattern 010..
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 0/0:15
forward-digits 4
prefix 1
!
dial-peer voice 118 pots
description llamadas informacion
destination-pattern 0118..
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 0/0:15
prefix 118
!
dial-peer voice 95302 voip
description llamadas entrantes
huntstop
destination-pattern 9530207..

no modem passthrough
voice-class codec 1
voice-class h323 1
session target ipv4:192.168.65.11
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate 9600
fax protocol pass-through g711alaw
!
dial-peer voice 8100 voip
description Tfnos SRST Registrados en Cisco1760
preference 10
destination-pattern 81..
voice-class h323 1
session target ipv4:192.168.65.2
dtmf-relay h245-alphanumeric
codec g711alaw
fax-relay ecm disable
fax rate 9600
fax protocol pass-through g711alaw
!
dial-peer voice 1400 pots
description llamada telefonica
destination-pattern 014..
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 0/0:15
prefix 14
!
dial-peer voice 95359 voip
description llamadas entrantes
destination-pattern 9535981..
modem passthrough nse codec g711alaw
voice-class codec 1
voice-class h323 1

session target ipv4:192.168.65.11
incoming called-number .
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate disable
!
dial-peer voice 8167 voip
description fax
destination-pattern 953598167
modem passthrough nse codec g711alaw
session target ipv4:192.168.65.11
codec g711alaw
fax-relay ecm disable
fax rate disable
!
dial-peer voice 8168 voip
description fax
destination-pattern 953598168
modem passthrough nse codec g711alaw
session target ipv4:192.168.65.11
codec g711alaw
fax-relay ecm disable
fax rate disable
!
dial-peer voice 953 voip
description llamadas entrantes SRST
preference 10
destination-pattern 9535981..
voice-class codec 1
session target ipv4:192.168.65.2
!
dial-peer voice 8000 pots
description llamadas 807117000
destination-pattern 0807......
progress_ind setup enable 3
progress_ind alert enable 8

fax rate disable
direct-inward-dial
port 0/0:15
prefix 807117000
!
dial-peer voice 5 pots
description llamadas Salesforce Internacionales
destination-pattern 500T
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 0/0:15
prefix 00
!
dial-peer voice 56 pots
description llamadas Salesforce Moviles
destination-pattern 56........
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 0/0:15
prefix 6
!
dial-peer voice 59 pots
description llamadas Salesforce Nacionales
destination-pattern 59........
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 0/0:15
prefix 9
!
dial-peer voice 8001 pots
description llamadas 807
destination-pattern 807......
progress_ind setup enable 3

fax rate disable
direct-inward-dial
port 0/0:15
prefix 807
!
dial-peer voice 2112 pots
description llamadas moviles
destination-pattern 21[12]6........
progress_ind alert enable 8
fax rate disable
direct-inward-dial
port 0/0:15
prefix 6
!
dial-peer voice 2123456789 pots
description llamadas moviles
destination-pattern 2[123456789]06........
progress_ind alert enable 8
fax rate disable
direct-inward-dial
port 0/0:15
forward-digits 9
!
dial-peer voice 26 pots
description llamadas moviles
destination-pattern 6........
progress_ind alert enable 8
fax rate disable
direct-inward-dial
port 0/0:15
prefix 6
!
no dial-peer outbound status-check pots
!
call-manager-fallback
max-conferences 4 gain -6

destination-pattern 6........
progress_ind alert enable 8
fax rate disable
direct-inward-dial
port 0/0:15
prefix 6
!
no dial-peer outbound status-check pots
!

Shadi Shami · ‎04-13-2015

Hello Guillermo,

I couldn't find any prefix configured on CUCM for H323 GW, as well not such config on the Gateway (router) itself.

From the debugs, I found an international call (calling number is: 21321928443). kindly add the prefix you want under the GW configuration on CUCM: International Number > replace "Default" with the prefix that you want then save and reset.

Thank you,

Shadi

ggl277808 · ‎04-13-2015

Here is another running config from another gateway and a log file attached .

So, I receive calls from many countries, Italy, France, EEUU, Germany, etc.. Have I to add the prefix for all this countries? Or is there another way to do that?

Sorry by my ignorance,

Thank you

Shadi Shami · ‎04-13-2015

Checked them, and same as before calling numbers for international calls come without 00 (or +).

can you advice what prefix you want to add?

all international calls will have the same prefix? If yes, what is that prefix?

ggl277808 · ‎04-13-2015

The prefix that I want the IP Phone display its the country code + phone number, I only can see the phone number, right now:
These are some of the country codes where I usually receive phone calls.

Thank you.

+61 Australia

+20 Egypt

+49 Germany

+33 France

+39 Italy

+1 EEUU

+44 UK

Shadi Shami · ‎04-13-2015

from the provided debugs I noticed that numbers were sent but without (+), which you can add in the GW configuration page on CUCM under Calling Party Settings > International Number, remove "default" and add + , then save the changes and click on the reset button.

ggl277808 · ‎04-13-2015

I´ve made the change that you recommend me, but it does not work.

for example the entire number is:

00393484820XXX

and in the display phone appears:

0484820XXX
The prefix number [0039] does not appears, and the first number "3" is substitute by "0"

Thank you

Shadi Shami · ‎04-13-2015

on the ip phone that received the call, can you check the directory (either received calls/ missed calls). how the number is showing up there?

ggl277808 · ‎04-13-2015

I´ve sent you the number that appear in the ip phone receive/missed calls directory

Shadi Shami · ‎04-13-2015

under Service parameters, enable digitanalysis complexity and collect CCM logs covering a test calls. or if you prefer we can have a remote session to check the issue.

ggl277808 · ‎04-14-2015

Hello Shadi,

Yesterday under Service parameters, I check the option TranslationAndAlternatePatternAnalysis, and I was doing some tests under dna in call manager, but I couldn´t see the problem either.

We could do the remote session if you want.

Thank a lot for your help.

Guillermo

Add Prefix for international Calling numbers