After CUCM 6.1.3 Upgrade 7912 phones not upgrading the respective firmwares

[binu.john]

Hi,

I upgraded a CCM 4.1.3 to CUCM 6.1.3,Upgrade was successful all the phones except 7912 take the new loads.

I have a problem with 7912 phones which is getting registered with their old firmwares,but not the new firmware listed in CUCM 6.1.3(In device defaults the load is pointed to the correct Device Pool).Pls advice.

Rgds

John

[ivillegas]

Check the bug: CSCeg27958: TFTP Client Busy Retry Behavior