06-26-2008 07:28 AM - edited 03-15-2019 11:33 AM
Hello all,
Recently I did 4.1(3) restore on a new machine. The old machine which was backed up was integrated with AD. As I did restore on the new machine (which wasn't plugged in the network where AD is), I can't log in anymore. Seems that CCM is looking for the users on AD which is unavailable. Any way to tell him not to search users in AD?
thanks for any kind of answer,
regards,
goran pilat
Solved! Go to Solution.
06-26-2008 08:35 AM
use ccmpwdchanger, but that needs to be connected to the AD.
disable MLA in the DB and get in with the pwd from the box
HTH
javalenc
if this helps, please rate
06-26-2008 08:07 AM
How to Change Active or Netscape Directory Integration Back to DC Directory in CallManager
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800ab82d.shtml
HTH
javalenc
if this helps, please rate
06-26-2008 08:29 AM
Hello,
Which password do I use then to log into CallManager? Neither of them seems to be working. How do I change CCMAdministrator password?
thanks,
goran
06-26-2008 08:35 AM
use ccmpwdchanger, but that needs to be connected to the AD.
disable MLA in the DB and get in with the pwd from the box
HTH
javalenc
if this helps, please rate
06-26-2008 10:36 PM
Yup, thanks a lot, that is it. And here's the link how to do that...
regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide