12-16-2014 01:18 AM - edited 03-17-2019 01:20 AM
I got cisco ATA 187 (for fax) and try to configure it on CME 9.0 but it not registred on CME.
ATA platform : APP187.9-2-3-1
voice register global
mode cme
source-address 10.14.20.254 port 2000
max-dn 80
max-pool 80
tftp-path flash:
file text
!
voice register dn 1
number 4099
name FAX
label FAX
!
voice register pool 1
id mac 0C85.25A6.9798
type ATA-187
number 1 dn 1
codec g711ulaw
12-16-2014 06:23 AM
Is your registrar expiration set? Try using the below. This is a common oversight with CME and SIP.
registrar server expires max 1200 min 300
Also, make sure you are re-creating your profile just in case something got messed up.
03-03-2015 04:42 AM
Have you checked the ATA187 got correct IP and TFTP server?
Go to web site (http://ATA187's IP) and check a status.
It will give you all current IP assignment, call manager and status of registration.
Check this below link.
Also, make sure you have correct configuration file, ATA[MAC-address].cnf.xml
for the sample configuration file.
Check this link as well.
Good luck
03-03-2015 05:48 AM
Try adding username and password under voice register pool 1
voice register pool 1
username ATA187 password test
Also, please post the following debugs "debug tftp events" and "debug ccsip messages"
Thanks,
FG
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide