cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
425
Views
0
Helpful
2
Replies

Auto Register Cisco 8821 on Call Manager Express

Phil Bartlett
Level 1
Level 1

I'm having real issues setting up 8821 to Auto Register on a CME v12.  I cant find much literature on this. Could anyone point me in the right direction?

 voice register global
mode cme
source-address x.x.x.x port 5060
max-dn 10
max-pool 10
load 8821 sip8821.11-0-6SR4-3
timezone 21
tftp-path flash:
file text
create profile sync 3420487450168531
auto-register
password password
auto-assign 11 to 20

2 Replies 2

b.winter
VIP
VIP

Is this your full SIP-CME config?
If yes, you are missing essential commands like "registrar server ..." under "voice service voip" --> "sip".
I don't know if you saw this guide: https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/99946-cme-sip-guide.html

Phil Bartlett
Level 1
Level 1

sorry  my full voice config is

    voice service voip
no ip address trusted authenticate
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
  bind control source-interface GigabitEthernet0/2
  bind media source-interface GigabitEthernet0/2
  registrar server expires max 1000 min 800
  no call service stop
!
!
!
!
voice register global
mode cme
source-address 10.3.110.2 port 5060
max-dn 10
max-pool 10
load 8821 sip8821.11-0-6SR4-3
timezone 21
tftp-path flash:
file text
create profile sync 3420487450168534
auto-register
  password password
  auto-assign 1 to 20
!
!
voice register dn  1
number 8000
name 8821-1
label 8000
!
voice register dn  2
number 8001
!
voice register dn  3
number 8002
!
voice register dn  4
number 8003
!
voice register dn  5
number 8004
!
voice register dn  6
number 8005
!
voice register dn  7
number 8006
!
voice register dn  8
number 8007
!
voice register dn  9
number 8008
!
voice register dn  10
number 8009
!
voice register pool  1
!
voice register pool  2
!
voice register pool  10

I try to add a type and ip network  to the voice register pool but i receive this error

C2911-VOIP-TESTBED(config)#voice regis pool 1
C2911-VOIP-TESTBED(config-register-pool)#type 8821
C2911-VOIP-TESTBED(config-register-pool)#$10.3.110.0 mask 255.255.255.0
Failed: CME mode only accept mac address for all phones or device id for soft client!