About b.winter

b.winter · 03-02-2022

SymptomsWith multiple SIP Trunks on the CUBE, it can be hard to correctly separate the incoming calls from CUCM to CUBE to the correct provider SIP Trunk.With this post, I'd like to present (in my opinion currently the most) convenient solution to th...

b.winter · 09-28-2023

Once you enable SSO in CUCM, you cannot use local accounts for Jabber anymore. Every login in Jabber will be SSO enabled.For MRA, if I remember correctly, it should still work with local accounts, if only CUCM is SSO enabled.Why don't you enable SSO ...

b.winter · 09-28-2023

Check the call in the DNA tool.Check the call in RTMT.Check the debug / logs of the call in the GW / CUBE, if you have one.There are so many old post on how to do basic troubleshooting ...

b.winter · 09-28-2023

Have you already checked the CDR Analysis and Reporting Administration Guide? It's eveything mentioned there:https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/12_5_1/Car/cucm_b_cdr-analysis-reporting-admin-guide-1251/cucm_b_cdr-analysi...

b.winter · 09-28-2023

Should basically be possible.Maybe this post helps: https://community.cisco.com/t5/unified-communications-infrastructure/error-sending-cdr-report-to-email-address-troubleshooting-steps/m-p/2983226

b.winter · 09-27-2023

Does the port and / or the line in CUCM have the correct CSS assigned, to be able to make calls? Or are you sure, you are dialing correctly?Sounds to me, that the device/line in CUCM has no permission to dial outside or you are not dailing correctly ...

Member Since	‎10-10-2017 07:25 AM
Date Last Visited	‎09-28-2023 10:46 AM
Posts	1,880
Total Helpful Votes Received	3743

User Statistics

User Activity

Multiple SIP Trunks on CUBE - URI based Dial-peer Matching

Re: SSO on UCM and local accounts

Re: Call fails when 911 is included in the number anywhere.

Re: CDR report send via email

Re: CDR report send via email

Re: FAXing one way failure on FXS port on isr4331