cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
334
Views
0
Helpful
1
Replies

Basic CME 4.3 Config Problem...

andymccall
Beginner
Beginner

Hi Folks,

I'm trying to get a single 7970G phone to register against a 2611XM running CME 4.3 as part of studying for my CCNA Voice.  I've done lots of reading around and come up with the config attached, but the phone I've got just sits at the Upgrading screen when its plugged in.  I think I'm missing something fairly important on my config.  I'm not even sure if its getting an IP address from the DHCP server...

At the moment, the hardware is configured 2611XM-fa0/0->PSU Brick->Phone.

Please can someone take a look and point me in the right direction?

Thanks,

Andy McCall

1 Reply 1

Bruno Rangel
Advocate
Advocate

Take a look on this line of the your DHCP Config:

ip dhcp excluded-address 192.168.2.1 192.168.2.254

No IP address will br provided for your Devices.

2 options here:

set up in your IP Phone a Ip address

Change the range of the IP excluded in your config.

Try:

no ip dhcp excluded-address 192.168.2.1 192.168.2.254

ip dhcp excluded-address 192.168.2.10 192.168.2.254

Cheers
Bruno Rangel
Please remember to rate helpful responses using the star bellow and identify helpful or correct answers
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: