Hi.
I have Cisco 3925 with CUCME 10.5 and several CP-7821 SIP phones.
I want use the presence service with blf monitoring for speed-dial.
I use blf-speed-dial command in voice register pool 1 and speed-dial appears on second line button of phone, but monitoring on that button doesn't working.
(BLF monitoring for call lists is working. I can see status in missed call list. But what I want is BLF monitoring for speed-dial. May be blf monitoring for speed-dial works only for SCCP?)
Please help.
This is my config:
voice register dn 1
number 7299
allow watch
name 7299
shared-line max-calls 6
label 7299
voice register dn 12
number 7009
allow watch
pickup-group 01
name 7009
shared-line max-calls 6
label 7009
...
voice register pool 1
busy-trigger-per-button 1
id mac F09E.636F.ADAE
session-transport tcp
type 7821
number 1 dn 1
presence call-list
dtmf-relay sip-notify
voice-class codec 3
description 7299
no vad
blf-speed-dial 1 7009 label "test" device
voice register pool 12
busy-trigger-per-button 2
id mac F09E.636F.AD36
session-transport tcp
type 7821
number 1 dn 12
dtmf-relay sip-notify
voice-class codec 3
description 7009
no vad
...
presence
presence call-list
max-subscription 130
!
sip-ua
presence enable
