07-03-2012 11:13 PM - edited 03-16-2019 12:00 PM
Hi All,
we have one headquarter and 2 branches. Hq is using cisco ip phone with unified cm release 8.
Now our aim is use cisco ip phone at branches.
When I buying a cisco 2921 it comes with "CISCO 2921 UC Bundle w/ PVDM3-32,FL-CME-SRST-25, UC License PAK" .
Is it possible buying 2921 without "FL-CME-SRST-25, UC License PAK". So I will register ip phone to unified CM. and also I will buying ip phone and ip phone license.
Finaly it is posible buying cisco 2921 without "FL-CME-SRST-25, UC License PAK" for cost saving.
Solved! Go to Solution.
07-03-2012 11:20 PM
Hi,
I think FL-CME-SRST-25 license is free with ISR g2 routers. So no cost saving if you do not want it.
For better understanding of purchase related query, we have very good service at cisco.com/go/ph. Open case here and you will get all the required information.
Regards
Ronak patel
Rate helpful posts.
07-03-2012 11:15 PM
And Also When buying cisco ip phone with licensing. Is it different to take license for call manager express or for unified CM ?
07-03-2012 11:20 PM
Hi,
I think FL-CME-SRST-25 license is free with ISR g2 routers. So no cost saving if you do not want it.
For better understanding of purchase related query, we have very good service at cisco.com/go/ph. Open case here and you will get all the required information.
Regards
Ronak patel
Rate helpful posts.
07-04-2012 02:53 PM
Bundles are cheaper than the individual elements.
You need at least the UC feature license and a PVDM3-xx and an ISDN vwic to do voice on the router. (assuming you need pstn connectivity in the box)
If you do want to save costs, go for the 2901, it will handle 1 pri just fine. (al least if you have a pvdm3-32)
Regards,
Erik
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide