cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Bookmark
|
Subscribe
|
772
Views
0
Helpful
1
Replies

Call recording, calls encryption. security configuration

Nihad Huseynli
Level 1
Level 1

Hello!

I want to encrypt all calls on CUCM 10.5

CUCM was changed to mixed mode and was created device security profiles with encryption mode.

What different between encrypted mode and authenticated mode in device security profile?

But i want thant only 1 host can record this encrypted call. What software can you advice for this?

i have uploade screenshots from CUCM.

1 Reply 1

Manish Gogna
Cisco Employee
Cisco Employee

Hi Nihad,

You cannot implement signaling or media encryption without device authentication. To install device authentication, enable the Cisco CTL Provider service and install and configure the Cisco CTL client.

For recording and monitoring of encrypted call please check 'Secure Call Monitoring and Recording Setup" section of the security guide

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/10_0_1/secugd/CUCM_BK_C68276B4_00_cucm-security-guide-100/CUCM_BK_C68276B4_00_cucm-security-guide-100_chapter_010001.html

HTH

Manish