Having an odd issue. CCME.
<br />
<br />I can consultativley transfer internally fine, no problem.
<br />
<br />As soon as I want to transfer a call to an outside line (Transfr, 9, then number) I immediatley get the number not recognised beeps.
<br />
<br />What would I be missing? All my dial peers work, so 9 then a number works fine.
<br />
<br />This doesnt even attempt to process the number, it just stops as soon as it see's the 9 being input.
<br />
Here are my dial peers for reference:
dial-peer voice 1 pots
destination-pattern 920......
port 0/0/0:15
forward-digits 6
prefix 20
no sip-register
!
dial-peer voice 2 pots
description **Answers All Incoming Calls**
incoming called-number .
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 3 pots
description ** Outbound International Call **
preference 1
destination-pattern 900T
port 0/0/0:15
prefix 00
no sip-register
!
dial-peer voice 4 pots
description ** Outgoing national landline / mobiles **
preference 10
destination-pattern 90[1-7].........
port 0/0/0:15
forward-digits 11
no sip-register
!
dial-peer voice 5 pots
description ** Outgoing Short length 0800 number **
preference 9
destination-pattern 908T
port 0/0/0:15
prefix 08
no sip-register
!
dial-peer voice 6 pots
destination-pattern 90[1-7]........
forward-digits 10
!
!