Callmanager Express : Dial plan problem

[ccr_cisco]

Hello,

I have 2 sites interconnected by a H323 trunk. Site A has dial plan 32x site B has 3xxx.

When on site A I want to dial a number on site B with for example number 3257 it will dial 325 in site A. This happen if I dial on-hook or off-hook

Is there a way (without changing dial plan) on CME of site A to not automtically dial the first 3 digit.

Dial-peers are OK if I type "sh dialplan number 3257" it well show the H323 trunk. The problem appears on the dialing phone itself.

Thanks for your help.

Regards

[Jaime Valencia]

Add a site code and dial site code + 3/4 digits

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk