12-12-2006 12:36 AM - edited 03-14-2019 07:11 PM
hi!
how do i connect linksys phone(spa941)
with ccm 5.0 ?
i connected x-lite with ccm 5.0.
it is very good.
but, i do not connecet linksy phone.
help me, thanks.
12-18-2006 07:55 AM
When third-party SIP phones get configured, the Cisco Unified CallManager database gets updated when the administrator uses Cisco Unified CallManager Administration.
Need to enable Digest Authentication for Third-Party SIP Phones
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/sys_ad/5_0_4/ccmcfg/b09sip3p.htm
10-17-2007 03:44 PM
I would also like to use Linksys phone for our remote users. We will have CCME5 setup, and have cisco phones in the office. My goal is to have the remote users use Linksys phones, because they connect via SIP. Is it possible for them to connect to the CCME without any other special routing on the remote end?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide