Hi
When I don't use VSA all information gets logged nice and readable on the Radius server.
However, I'm missing some fields and understand that vsa accounting will give me some of them. Unfortunately when I add the command below to achieve it everything turns out unreadable in the logs on the radius server (looks like some form for encryption takes place). Anyone who knows how to configure it to be readable?
radius-server vsa send accounting
Ruben
Hi Ruben,
Please see this document on Cisco.com
http://www.cisco.com/en/US/docs/ios/voice/cdr/developer/guide/cdradius.html#wp1055505
There're certain attributes which are passed as part of Cisco VSA fields. Also, you can define the templates for the information you wish to send to RADIUS.
Regards,
Akhil Behl
Senior Network Consultant
akbehl@cisco.com
Author of “Securing Cisco IP Telephony Networks”
http://www.ciscopress.com/title/1587142953