Change IP CUCM 6.1.5 no cluster with temporary license

[pbogaerts]

Hello,

I have a CUCM6.1.5 (no cluster) with a temporay license, I need to change the address of the server urgently. After this ip change (couple of weeks), the CUCM will be upgraded to 7.1.5, then we will have a permanent license. Is there something special that I need to keep in mind or can I change the ip without any problems with the commands set network gateway and set network ip eth0

[acampbell]

Hi,

Here is a link to changing IP address

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/6_1_2/ipchange/ipchg612.html

Remember to change any v/gateway config like dial peers, SIP trunks, MGCP etc etc

HTH

Alex

Please rate useful posts

[Robert Thomas]

Make sure not to skip over any step on the document, otherwise the database may not start after the process and the server might need to be rebuilt.

[pbogaerts]

Thanks for the reply's, the change went smooth without any problem