Change Phone Language

[christianbernal]

Good Day!!

One question!! I have one cluster CUCM 11 in english, I need change language only in the phones to the spanish, How can do it ??

[Venkatesh Perumal · Accepted solution]

You have to install the Spanish locale file in cucm, followed by the reboot of server.

once installed you can set the language as Spanish from the parameter User Locale on the phone configuration page which is phone specific

or set it for from the system-->enterprise parameter-->Default User Locale for all the phones in the cluster.

locale file can be downloaded from here

https://software.cisco.com/download/release.html?mdfid=286284802&softwareid=282074333&release=11.0(1.1000-1)&flowid=77897

[christianbernal]

Thanks Venperum

I install the file .sgn in the TFTP Publisher and Subscriber, and restart the two nodes, but in the Default user Locale don´t appear in spanish.

Is necesary realize the other procedure ?

[Venkatesh Perumal]

can you see Spanish in user configuration page under 'user locale'.

and have you followed the right procedure to install the locale, refer below link.

http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers#How_to_install_locales.3F

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-71/113395-cucm-locale-nl-00.html#conf