Cisco 2911 auto attendant and gateway configuration question
This is first time we use Cisco IP Telephony solution.
We have 2 MCS7825 (publisher and subscriber with CUCM version 8.5.1) and 1 Cisco Router 2911 with 5 x VIC2-4fxo (installed on Cisco Router 2911).
Cisco Router 2911 using IOS Version 15.0(1r)M15 and CUE 8.6.1 installed on ISM
We want use Cisco Router 2911 as voice gateway and auto attendant for MCS7825.
- How to create auto attendant on Cisco 2911 and use it with MCS7825 (for example: incoming call from PSTN will play auto attendant)?
- How to create hunting outbound call to PSTN from MCS7825 that use Cisco2911 as voice gateway (When someone dial pstn number for example: 9+external number, it automatically will use idle FXO port on Cisco2911)?
Note: On CUCM Device Gateway Menu, it only support 2 protocol (SCCP and MGGCP) for Cisco 2911.
Cisco Finesse Not Ready - Call Overlap status is very a very common issue seen on Finesse desktop. Agents miss two calls and they are put in Not Ready - Call Overlap status. This is very likely related to CVP server and it's unreachabl...
Lab 1: Cisco Meeting Server Standalone CertificatesLab 2: Cisco Meeting Server Cluster Certificates with Multi-SANLab 3: Multiple Certificates with Multiple CA ServersLab 4: Cisco Meeting Server Cluster Certificates Advanced ScenarioLab 5: Streamer Servic...
Certificates are the first step to deploy Cisco Meeting Server, preparing certificate are very important to enable different services. As a VOIP administrator, mastering the concept of certificates is unavoidable
Using multiple CA servers, instead of a si...
I just finished to write a comprehensive certificates preparation for Cisco Meeting Server Clustering. Through 60 pages I explained in detail, how to create certificates for database cluster, callbridge cluster, certificate chain for webbridge3, certifica...