Cisco 500 Series Phones and CUCM 6.1

[gearmisner]

Hey Guys,

Are Cisco 500 Series Phones supported on the CUCM 6.1 platform? I know they are supported on the UC500 system, but I would like to use them on CUCM because of cost reasons. Thanks for the help.

[Nicholas Matthews]

Hi,

The 500 series phones are supported only on the UC520. They run a special SPCP protocol that only works with the UC520.

You may want to look into the 69xx series phones that were just released:

http://www.cisco.com/en/US/products/ps10326/

hth,

nick

[gearmisner]

Nick,

Thank you for all of your help. I will look into the 69XX phones.