05-06-2012 09:02 PM - edited 03-16-2019 11:00 AM
Hi,
I am having a problem configuring the backlight behavior of the Cisco 7945 IP Phone.
I am trying to disable the backlight when idle after 60 seconds...
I tried to configure the below and I'm not sure what I am missing.
on telephony-service:
telephony-service
service phone displayIdleTimeout 00:01
service phone daysDisplayNotActive 1,2,3,4,5,6,7
create cnf-file
reset all
on ephone-template:
ephone-template 1
service phone displayIdleTimeout 00:01
ephone 1
ephone-template 1
Please help!
Regards,
Jenna
Solved! Go to Solution.
05-06-2012 09:56 PM
Try using the following commands:
Service phone daysDisplayNotActive
Service phone displayIdleTimeout
Service phone displayOnDuration
Service phone displayOnTime
Here is also a previous answer from Rob.
https://supportforums.cisco.com/thread/2080523
-Luis A.
05-06-2012 09:56 PM
Try using the following commands:
Service phone daysDisplayNotActive
Service phone displayIdleTimeout
Service phone displayOnDuration
Service phone displayOnTime
Here is also a previous answer from Rob.
https://supportforums.cisco.com/thread/2080523
-Luis A.
05-08-2012 01:12 AM
Thanks.
It is now working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide