09-15-2014 11:39 AM - edited 03-17-2019 12:10 AM
Hello, I have to find GUI files for CME 10.5, cisco 2901 and IOS 15.4.3.M but its very difficult find it.
10-05-2014 04:55 PM
I'm having the same issue. I have a brand new 2921 that was shipped with CME and CUE. CME didn't include the GUI files and now waiting for TAC to get back to me.
My router doesn't have enough flash to install the cme-153-3Mv1.rar file from CCO, the GUI is in there and even copying all the files manually I still can't get the GUI to run.
10-07-2014 04:13 AM
In case the GUI files are there in flash, send us the following:
1. Running configuration from the CME.
2. Show flash
3. show ip http server all
4. Show ip http server secure status
10-07-2014 05:22 AM
TAC was able to help resolve this issue by setting the telephony-service to the same source IP as my SIP service, once configured the GUI began to work.
03-18-2015 02:12 AM
Hi there
Could you please the exact configuration should be done in the router to enable since i have same issue and i want check if i am missing any thing. Also the flash files please.
I appreciate your help
05-26-2015 05:02 PM
Hi, I found the software here: |
https://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=277641082&softwareid=282786567
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide