CME 10.5 GUI is not working with HTTPS

[vikashjrs]

CUCME 10.5.0 Gui is not working through HTTPS getting certificate error "This page can’t be displayed
Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://10.12.4.24 again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4 (link for the details), which is not considered secure. Please contact your site administrator"

Does any one able to access Cme GUI through HTTPS

[hsood]

Hi,

Do you have any firewall or any device monitoring the traffic?

CME 10.5GUI works fine with HTTPS.

Try eliminating any device in between your CME and the PC and then give it a  shot.

Regards,

Hitesh

[vikashjrs]

Hi ,
There is no firewall or any device in between
Please find the https configuration
no ip http server
ip http secure-server
ip http secure-client-auth
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash0:CME 10.5.0 GUI
 url authentication https://X.X.X.X/CCMCIP/authenticate.asp secretname PASSWORD
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
still GUI is not working please let me know if I am missing anything.
Note: same configuration working with HTTP whenever I am enabling HTTP.