CME + CUE + PBX for 24 users

[lazamarius]

Hello guys,

I am working to a project for a customore that wants a  cheap Cisco VoIP solution that has IVR.They dont have enough money so I need to make the migration slowly from the old PBX.

I want to implement a cisco 2811 router with PVDSM 16/32 + CUE + 4FXS ports and a 3560 Poe 24 ports with 7970 Ip phones.

So I have to make a trunk with the old analog PBX via FXS ports.The PBX is connected to the PSTN ...is the 4 fxs ports and the dsp enough ?

They usally get heavy traffic from outside world and everything is analog.

And they also want IVR like : for x press 1001 for y press 1002.Is this possible with a CUE basic license?

Any ideas?

Thank you,

[Jaime Valencia]

This is the Video Over IP community, you might want to move this to IP Telephony.

[lazamarius]

Anyone?