CME Europe Dail Plan

[hbarrera2]

Guru's,

I have to install a CME/CUE in Amsterdam,Netherlands very soon. Does anyone have example confgs or know of a good document that shows how to set up the proper dial-peers for in/out phone calls for this area?

Thx

[sebastiaanp]

Here an example:

dial-peer voice 1 pots

description ** E1 PRI pots dial-peer **

translation-profile incoming Add-Extra-Digits-Incomming

incoming called-number .

direct-inward-dial

port 0/3/0:15

dial-peer voice 100 pots

description ** E1 PRI pots dial-peer national calls**

destination-pattern 00[1-7]........

port 0/3/0:15

forward 10

dial-peer voice 102 pots

description ** E1 PRI pots dial-peer local calls**

destination-pattern 0[1-9]......

port 0/3/0:15

forward 7

dial-peer voice 110 pots

description ** E1 PRI pots dial-peer 0800 numbers**

destination-pattern 0080T

port 0/3/0:15

prefix 080

dial-peer voice 120 pots

description ** E1 PRI pots dial-peer 090x calls**

destination-pattern 0090T

port 0/3/0:15

prefix 090

dial-peer voice 130 pots

description ** E1 PRI pots dial-peer international calls**

destination-pattern 000T

port 0/3/0:15

prefix 00

dial-peer voice 200 pots

description ** E1 PRI pots dial-peer **

destination-pattern 112

port 0/3/0:15

forward-digits 3

!

dial-peer voice 201 pots

description ** E1 PRI pots dial-peer **

destination-pattern 0112

port 0/3/0:15

forward-digits 3

[hbarrera2]

Sebastiaan,

Awesome! Thank you sir for the example dial-peers. I believe they use FXO lines instead of a PRI, but I would think that the destination patterns would still be the same. Also what exactly are the 200/201 dial-peers for?

Thx again!

[sebastiaanp]

200/201 are emergency numbers. The number is 112 and 0112 is the number for users who dial the 0 for an outside line by mistake. See also 911 and 9911