05-29-2015 04:21 AM - edited 03-17-2019 03:10 AM
Hallo team
On CME 10.5 I configured a mixed mode shared line but I face an issue. When I try to call the number 160 only the SCCP Phone rings.
I can make outbound calls from both SCCP and SIP Phone
SIP Firmware: sip78xx.10-1-1SR1-4
Here is the config:
voice register dn 16
number 160
allow watch
shared-line max-calls 4
no-reg
!
voice register pool 16
busy-trigger-per-button 2
id mac E0D1.XXXX.XXXX
type 7861
number 1 dn 16
presence call-list
dtmf-relay rtp-nte
voice-class codec 1
username 160 password 160
no vad
!
ephone-dn 16 dual-line
number 160
shared-line sip
!ephone 16
mac-address 7426.XXXX.XXXX
max-calls-per-button 4
type 7925
button 1:16
!
Thanks!
06-15-2015 02:02 AM
nobody?
01-31-2017 08:29 AM
Hello Derveniss,
Please could you share how you were able to workaround this issue?
I am currently facing something a bit similar to what you faced.
SCCP(7926) and SIP(7821)
SIP is able to make and recieve calls but SCCP can only receive calls but not make calls.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: