Hi. Please help.
I have configured Cisco Call Manager Express on Cisco 2811 Router.
On interface Fa0/0.50 i configured voice default gateway IP address 172.16.11.1
VOICE address 172.16.11.0
!
ip dhcp pool VOICE
network 172.16.11.0 255.255.255.0
default-router 172.16.11.1
option 150 ip 172.16.11.1
!
!
interface FastEthernet0/0.50
encapsulation dot1Q 50
ip address 172.16.11.1 255.255.255.0
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.11.1
!
And now i must configured my phones call to PSTN through provider.
Provider take me cabel to connect to my interface fa0/1 and set them ip address 172.23.98.249 they ASTERISK ip 172.23.98.253
gateway 172.23.98.254
i configured Dial-peer bun can not call to PSTN.
Please help to configure SIP trunk between CME and Asterisk.
!
interface FastEthernet0/1
ip address 172.23.98.249 255.255.255.0
duplex auto
speed auto
!
Provider give sip user and password but i can not configure it. SIP can not registered.
İ must configure outgoing and incoming call from CME :-(
In attachment i add all my config from router.
I think that the problem is in the routes or sip trunk
I would be very grateful if you help me to solve this problem!!
