Hi ,
I'm testing with CME for simple AA using the TCL script. I'm trying with script 2.0.2.0. When the moment dialed i got the error message like your call bill be disconnected. We couldn't able to identify the issue.
Below are the configuration
dial-peer voice 100 voip
service aa
session protocol sipv2
session target ipv4:10.40.40.151
incoming called-number 8005
codec g711ulaw
no vad
application
service aa flash://its-CISCO.2.0.2.0.tcl
paramspace english language en
paramspace english index 1
paramspace english location flash://
paramspace english prefix en
param aa-pilot 8005
Thank in Advance.
