Hello. I have configured parallel voice hunt group with 3 phones in list (1 skinny phone, 2 SIP phones). When I'm calling the pilot number from local phone - all phones ring. But when I'm calling to public telephone number of our company from my cell phone and hit the pilot number of the hunt group only two phones ring out of three - one skinny phone and one SIP phone. Previously the "bad phone" was 160, but after I had renumbered list setting of the voice hunt-group the phone which doesn't ring is 161 (both are SIP phones). The phone is working and I can call it even from outside (using IVR).
Here is a config:
voice hunt-group 1 parallel
list 160, 161, 169
final 994
statistics collect
pilot 100
voice translation-profile FromSipOperator
translate called 3
voice translation-rule 3
rule 1 /<...>4737/ /100/
rule 2 /<...>4163/ /100/
ephone-dn 100 octo-line
number A01 secondary B01 no-reg both
conference ad-hoc
no huntstop
ephone-dn 3 dual-line
number 169 no-reg both
label Reception
name Reception
allow watch
voice register dn 47
number 160
allow watch
name Reception
no-reg
label Reception_2
voice register dn 3
number 161
allow watch
name Reception
no-reg
label Reception_DECT
sh voice hunt-group
Group 1
type: parallel
pilot number: 100, peer-tag 2147483647
list of numbers:
Member Used-by State Login/Logout
====== ======= ===== ============
160 160 up login
161 161 up login
169 169 up login
preference: 0
preference (sec): 0
timeout: 180
final_number: 994
stat collect: yes
phone-display: no
Version of CME is 10.5, by the way.
So here goes the question - why one of phones in the hunt group doesn't ring when inbound call comes from PSTN and all phones ring when inbound call comes from local extension and how can I fix this behavior so all phones in the hunt group will work properly?
Thanks for any help.
